Citizen CKG-15K, Operating Manual

Page: 12 / 17

CKG counting scales user’s guide
- - 10
The stored value is entered from the keyboard. Enter the numeric value to be stored using
the numeric keys. Then press the
PST key to store the value.
To clear the value from memory and thereby turn off the check-weighing feature, enter the
value "0" into the memory.
7.6 Manually Accumulated Total
The values (weight and count) shown on the display can be added to the values in the
accumulator by pressing the
M+ key. The "Weight " display will show the total weight, the
"Count" display will show the total accumulated count and the "Unit Weight" display shows
the number of times items have been added to the accumulation memory. The values will
be displayed for 2 seconds before returning to normal.
The scale must return to zero or a negative number before another sample can be added to
the memory.
More product can then be added and the
M+ key pressed again. This can continue for up to
99 entries, or until the capacity weight display is exceeded.
To observe the total stored press the
MR key. The totals will be displayed for 2 seconds.
To clear the memory press MR to recall the totals from memory and then press the CE key
to clear all values from memory.
7.7 Automatic Accumulated Totals
The scale can be set to automatically accumulate totals when a weight is placed on the
scale. This eliminates the need to press the
M+ key to store values into memory. However
the M+ key is still active and can be pressed to store the values immediately. In this case
the values will not be stored when the scale returns to zero.
See the PARAMETERS Section for details of how to enable Automatic Accumulation.
SECTION 8 BATTERY OPERATION
The scales can be operated from the battery if desired. The battery life is approximately 100
hours.
When the battery needs charging the arrow above the low battery symbol under the weight
display will turn on. The battery should be charged as soon as the arrow above the symbol
is on. The scale will still operate for about 10 hours after which it will automatically switch off
to protect the battery.
To charge the battery simply plug into the mains power. The scale does not need to be
turned on.
The battery should be charged for 12 hours for full capacity.
Just under the quantity display is an LED to indicate the status of battery charging. When
the scale is plugged into the mains power the internal battery will be charged. If the LED is
green the battery has a full charge. If it is Red the battery is nearly discharged and yellow
indicates the battery is being charged.
As the battery is used it may fail to hold a full charge. If the battery life becomes
unacceptable then contact your distributor .