Citizen CBM-272, User Manual

Page: 48 / 157

— 29 —
<Error Details>
Head-up ----- Occurs when the head-up lever is raised. The printer cannot
feed the paper or print. The parallel interface outputs BUSY
and FAULT, and serial interface DTR, respectively.
Head overheat ----- If the temperature of the printing head rises (About 65°C or
more), in order to protect it against overheating, a printing
head temperature sensor will be activated to stop printing.
The parallel interface outputs BUSY and FAULT, and serial
interface DTR, respectively. If the temperature drops (About
60°C), printing will be automatically resumed.
Paper near end ----- If the diameter of the paper roll decreases, the paper near
end sensor will react to inform you that the paper roll is
running out. See “4.12 Paper Near End Function”.
Paper end ----- If the paper roll runs out, the paper sensor near the printing
head will react to stop printing. See “4.11 Paper End
Function”.
Error
Memory check error
Head-up
Head overheat
Paper near end
Paper end
Macro execution wait
ERROR Lamp
Quick blinking
ON
Blinking
OFF
OFF
Slow blinking
PAPER Lamp
OFF
OFF
OFF
ON
ON
OFF
Reset
Cannot be reset
Lower the head-up lever.
Automatically reset by a
temperature drop
Set a new paper roll after a
print stop.
Set a new paper roll.
Press the FEED switch.
Display
2. ERROR lamp (Red), PAPER lamp (Red)
Indicates an error by illuminating or blinking the lamps.