B) OPERATION PROCEDURE
1 SETTING THE TIME (HOUR, 24HOUR, MINUTE and SECOND)
2 SETTING THE DATE
C) SETTING THE TIME (HOUR, 24 HOUR, MINUTE AND SECOND)
The hour, 24 hour, minute and second are set by the same operation.
SETTING PROCEDURE
HOUR & 24HOUR
→
MINUTE
→
SECOND
Pull the crown out to the 2nd position to stop the second hand at 0 (12 o'clock).
Turn the hour/minute hands in a
clockwise
direction to set the time.
To ensure time is set accurately, first turn the minute hand 5 minutes ahead of desired time and
then turn back (in a counterclockwise) to the desired time.
After setting the time, use a time signal to synchronize the watch by pushing crown to the normal
position to start the second hand going.
NOTE:
Make sure you have correctly set AM/PM before setting the time.
When the day changes over, it is a.m..
(Day changes over between 0:00a.m. and 5:30a.m. or little later)
Check am./p.m. by the 24hour hand.
D) SETTING THE DATE (BY QUICK OPERATION)
Pull the crown out to the 1st position. Turn the crown
counterclockwise
to set the date quickly.
NOTE:
* Do not set the date between the hours 9:00p.m. and 0:30a.m.. The date may not change correctly
the next day.
