26
6. Lubrication
①
Use DOT3 for the brake fluid;
②
Use 1L of 90GL hypoid gear oil for the rear axle;
③
Lubrication points (use grease): a. steering gears; b. middle shaft; c. horizontal bars; d. steering ball
joints; e. bearings;
Rear End
Steering Gear
Middle shaft
7. Running-in of new vehicle
In order to guarantee the performance of the vehicle and enhance its reliability and working life, its parts
should experience a certain period of running-in before it works under peak load. Each new vehicle is
required to receive one month of running-in time or 1000kms running-in distance, detail procedure is as per
the following.
Before running-in, you should check the capacity of battery electrolyte and brake oil. If any insufficiency is
found, you should fill it accordingly.
The tire pressure shall comply with the rated pressure marked on the tire.
Limit the speed of the vehicle to control the current of the vehicle under 40A during driving.
Often check and tighten regularly the fixing parts of each connecting points
8. Periodic Maintenance Charts
Regular maintenance is required for the best performance and safe operation of the vehicle.
WARNING!
Make sure to turn off the power key and apply the parking brake when you do the maintenance
unless otherwise specified. If the owner is not familiar with the maintenance of this vehicle, this work should
be done by the dealer from whom you purchased your vehicle.
Summary of Contents for Bubble Buddy
Page 5: ...5 Fig 2 Fig 3...
Page 29: ...29...
