2.4 Safety of persons
• The instructions for operation, care and maintenance described in the operating instructions must be observed.
• Do not use the device if you are unwell or under the influence of drugs, alcohol or medication.
• A moment of inattentiveness when using the device can lead to serious injury.
• Store unloaded devices that are not in use in a dry and locked place inaccessible to unauthorised persons.
• Damaged or defective devices must be repaired exclusively by Kerbl Service.
Personal protective equipment
Hearing protection must be worn when working with the spring gun.
Wear protective goggles and a face protector if necessary when working with the spring gun.
Installation site
• Never set up the spring gun near public routes and spaces.
• The spring gun may only be used in places where there is no danger to humans or animals.
• Ensure that no unauthorised persons have access to the device once it is set up.
• Covering by means of a separately available protective cage is recommended. (Kerbl item 299798)
3. Description
The VoleShot spring gun is designed to kill voles quickly and in a way that minimises suffering by means of a pressure wave. The necessary
pressure wave is generated from a 9 x 17 mm cartridge.
3.1 Intended use
The VoleShot spring gun is intended exclusively for the control of voles and may only be used for this purpose.
The VoleShot spring gun is for outdoor use only.
Indoor use is not permitted and violates the intended use.
The safety information set out in these operating instructions must be complied with. Use of the spring gun in any other area shall be deemed
incorrect use. The manufacturer accepts no liability for any resulting physical and/or material damage.
These operating instructions are available to download at www.kerbl.com.
3.2 Technical data
Weight: 900 g
Height: 113 mm
Width: 41 mm
Length: 154 mm
Load carrier: 9 x 17
3.3 Product overview
1 Triggering rod
2 Cocking piece
3 Safety catch
4 Trigger
5 Cartridge holder
6 Handle plate
7 Locking pin
General tolerances are not valid for basic dimensions of semi-finished parts!
The general tolerances are only valid and applicable on shown nominal sizes
and geometric sizes!
Break and debure sharp edges!
von
2
5
4
3
7
1
6
Copyright:
"Weitergabe sowie Vervielfältigung dieser
Dokumente, Verwertung und Mitteilung seines
Inhalts sind verboten, soweit nicht ausdrücklich
gestattet. Zuwiderhandlungen verpflichten zu
Schadenersatz. Alle Rechte für den Fall der
Patent-, Gebrauchsmuster- oder
Geschmacksmustereintragung vorbehalten."
Albert KERBL GmbH
Felizenzell 9
D- 84428 Buchbach
"The copying, distribution and utilization of this
documents as well as the communication of its
contents to others without expressed
authorization is prohibited. Offenders will be
held liable for the payment of damages. All
rights reserved in the event of the grant of
patent, utility model or ornamental design
registration."
Albert KERBL GmbH
Felizenzell 9
D - 84428 Buchbach
"Toute communication ou reproduction de ce
document, toute exploitation ou communication
de son contenu sont interdites, sauf
autorisation expresse. Tout manquement à
cette règle est illicite et expose son auteur au
versement de dommages et intéréts. Tous
droits réservés pour le cas de la déliverance
d'un brevet, d'un modèle d'utilité ou d'un
modèle de présentation."
Albert KERBL GmbH
Felizenzell 9
D - 84428 Buchbach
1
1
A3
STAT.
REVISION NOTE
DATE
NAME Urspr.
Baugruppe / Assembly
vole gun - assembly
Almaier
27.6.2019
NORM
CHECK
DRAW
NAME
DATE
DET. SCALE
1:2
SCALE
BASE SIZE/SEMI-FINISHED PART
MATERIAL:
von
Blatt
22918-2
DWG NO.
TITLE:
ARTICLE
NUMBER
KERBL:
ISO 5456-2 Projection
methode1
Albert KERBL GmbH
l
Felizenzell 9
l
D-84428 Buchbach
Fon +49 (0)8086 - 933-100
l
Fax +49 (0)8086 - 933-500
Mail [email protected]
l
www.kerbl.com
General tolerances
ISO 2768 - mK
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS
PROJECT
NUMBER
KERBL:
700286
908,277 g
FINISHED SURFACE:
WEIGHT IN GRAMM
(WITHOUT FINISHED SURFACE):
Fig. 3
