Cisco WTR54GS User Manual Download Page 64 | Manualshive

Page: 64 / 86

background image

57

Appendix A: Troubleshooting
Frequently Asked Questions

Wireless-G Travel Router with SpeedBooster

What IEEE 802.11b features are supported?

The product supports the following IEEE 802.11b functions:

•

CSMA/CA plus Acknowledge protocol

•

Multi-Channel Roaming

•

Automatic Rate Selection

•

RTS/CTS feature

•

Fragmentation

•

Power Management

What IEEE 802.11g features are supported?

The product supports the following IEEE 802.11g functions:

•

CSMA/CA plus Acknowledge protocol

•

OFDM protocol

•

Multi-Channel Roaming

•

Automatic Rate Selection

•

RTS/CTS feature

•

Fragmentation

•

Power Management

What is ad-hoc mode?

When a wireless network is set to ad-hoc mode, the wireless-equipped computers are configured to
communicate directly with each other. The ad-hoc wireless network will not communicate with any wired
network.

What is infrastructure mode?

When a wireless network is set to infrastructure mode, the wireless network is configured to communicate with
a wired network through a wireless access point.

What is roaming?

Roaming is the ability of a portable computer to communicate continuously while moving freely throughout an
area greater than that covered by a single access point. Before using the roaming function, the user must make
sure that the workstation uses the same channel number as the access point of the dedicated coverage area.

To achieve true seamless connectivity, the wireless LAN must incorporate a number of different functions. Each
node and access point, for example, must always acknowledge receipt of each message. Each node must
maintain contact with the wireless network even when not actually transmitting data. Achieving these functions
simultaneously requires a dynamic RF networking technology that links access points and nodes. In such a
system, the user’s end node undertakes a search for the best possible access to the system. First, it evaluates
such factors as signal strength and quality, as well as the message load currently being carried by each access
point and the distance of each access point to the wired backbone. Based on that information, the node next

«
...
62
63
64
65
66
...
»

Summary of Contents for WTR54GS























































































Reviews:

No comments

Related manuals for WTR54GS

Brand: Watchguard Pages: 40

Brand: bintec elmeg Pages: 33

ER3-100 (5K02-55)

Brand: 8e6 Technologies Pages: 74

Brand: Abocom Pages: 1

Brand: Paradyne Pages: 23

Vigor 2760 Series

Brand: Draytek Pages: 54

Brand: TP-Link Pages: 2

Brand: 8level Pages: 52

AyrMesh IndoorAP

Brand: AYRSTONE Pages: 2

Industrial Network Track OSI

Brand: GarrettCom Pages: 10

McDATA Eclipse 1620

Brand: Sun Microsystems Pages: 9

Brand: SainSmart Pages: 12

Brand: Network Instruments Pages: 44

PowerTrans PT-7728

Brand: Moxa Technologies Pages: 8

Brand: Billion Pages: 16

Brand: National Instruments Pages: 37

SECURE BOOT STICK FX

Brand: Ecos Pages: 22

Brand: D-Link Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands