Cisco Wireless Express 526, Quick Start Manual

Page: 10 / 44

10
WLAN SSID The network name, or service set identifier
(SSID) . This is the default SSID that the access
points use when they join a controller.
RADIUS Server IP Address The IP address of the RADIUS server if one is
available and you intend to use it. If you are using
a RADIUS server, the following fields must be
completed:
•
Shared secret format (ASCII or HEX)
• Shared secret
• Confirm shared secret
•
RADIUS server port (default port is 1812)
•
Server status (enabled or disabled)
802.11b Network Status Check the checkbox to enable or disable the
802.11b radio network. The default is
Enabled .
802.11g Network Status Check the checkbox to enable or disable the
802.11g radio network. The default is
enabled .
Auto-RF Check the checkbox to enable or disable
automatic radio resource management. The
default is
enabled .
Table 1 Startup Wizard Information (continued)
Wizard Setting Action