Cisco WET54G User Manual Download Page 52 | Manualshive

Page: 52 / 54

background image

46

Appendix H: Regulatory Information

Wireless-G Ethernet Bridge

Appendix H: Regulatory Information

FCC STATEMENT

This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used according to the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which is found by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment or devices

Connect the equipment to an outlet other than the receiver's

Consult a dealer or an experienced radio/TV technician for assistance

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

INDUSTRY CANADA (CANADA)

This device complies with Canadian ICES-003 and RSS210 rules.
Cet appareil est conforme aux normes NMB-003 et RSS210 d'Industry Canada.
The use of this device in a system operating either partially or completely outdoors may require the user to obtain
a license for the system according to the Canadian regulations.

EC DECLARATION OF CONFORMITY (EUROPE)

Linksys declares that this product conforms to the specifications listed below, following the provisions of the
European R&TTE directive 1999/5/EC:

EN 301 489-1, 301 489-17 General EMC requirements for Radio equipment.

EN 609 50 Safety

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Linksys declares that WET54G V3 ( FCC ID: Q87-WET54GV3 ) is limited in CH1~CH11 for 2.4 GHz by

specified firmware controlled in U.S.A.

This device has been designed to operate with an antenna having

a maximum gain of 2 dBi. Antenna having a higher gain is strictly

prohibited per regulations of Industry Canada. The required

antenna impedance is 50 ohms.

Règlement d’Industry Canada

Les conditions de fonctionnement sont sujettes à deux conditions:

1) Ce périphérique ne doit pas causer d’interférence et

2) Ce périphérique doit accepter toute interférence, y compris les

interférences pouvant perturber le bon fonctionnement de ce

périphérique.

«
...
50
51
52
53
54
»

Summary of Contents for WET54G























































Reviews:

No comments

Related manuals for WET54G

Brand: D-Link Pages: 32

Brand: D-Link Pages: 6

Brand: D-Link Pages: 221

ShareCenter Pro DNS-1200-05

Brand: D-Link Pages: 68

Express Ethernetwork DI-707P

Brand: D-Link Pages: 14

Brand: H3C Pages: 26

PoleVault System A/V Source Inputs

Brand: Extron electronics Pages: 4

EdgeRouter PoE ERPoe-5

Brand: Ubiquiti Pages: 13

Brand: ICP DAS USA Pages: 8

Brand: Microtek Pages: 25

NetCon FBR-1409TX

Brand: LevelOne Pages: 88

Brand: CopperOptics Pages: 12

Brand: Deliberant Pages: 16

Brand: Sharedband Pages: 3

Brand: Ubiquiti Pages: 2

Brand: Eneo Pages: 49

DP1.2-Vision-IP-Fiber

Brand: G&D Pages: 240

Brand: Kasda Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands