Cisco WAP150 Quick Start Guide
7
WAP150 is DHCP. Make sure that your DHCP server is running and
can be reached.
See
Incorrect IP Address
for troubleshooting information, or if you
do not have a DHCP server.
S
TEP
2
Locate the IP address of the Cisco WAP150.
a.
The Cisco WAP150 can be accessed and managed by Cisco
network tools and services including the Cisco FindIT Network
Discovery Utility that enables you to automatically discover all
supported Cisco devices in the same local network segment
as your computer. You can get a snapshot view of each device
or launch the product configuration utility to view and configure
the settings. For more information, see
www.cisco.com/go/
findit
.
b. The Cisco WAP150 is Bonjour-enabled and automatically
broadcasts its services and listens for services being
advertised by other Bonjour-enabled devices. If you have a
Bonjour-enabled browser, such as Microsoft Internet Explorer
with a Bonjour plug-in, or the Apple Mac Safari browser, you
can find the Cisco WAP150 on your local network without
knowing its IP address.
You can download the complete Bonjour for Microsoft Internet
Explorer browser from Apple’s website by visiting:
http://www.apple.com/bonjour/
c.
Locate the IP address assigned by your DHCP server by
accessing your router or DHCP server. See your DHCP server
instructions for more information.
S
TEP
3
Launch a web browser, such as Microsoft Internet Explorer.
S
TEP
4
In the address bar, enter the default DHCP address and press the
Enter
key.
S
TEP
5
Enter the default user name of
cisco
and password of
cisco
in the
Username
and
Password
fields.
S
TEP
6
Click
Log In
. The Wireless Access Point Setup Wizard appears.
S
TEP
7
Follow the Setup Wizard instructions to finish the WAP device
installation.
