10
Cisco WAP150 Quick Start Guide
Rebooting the Cisco WAP150 or Resetting
to Factory Defaults
To reboot your Cisco WAP150:
•
If the Cisco WAP150 uses a power adapter, with the power on, use the
POWER
button to reboot the device. The
POWER
button only functions
when the Cisco WAP150 uses a power adapter.
•
If the power supply is PoE, unplug your Ethernet connection for three
seconds and plug it back in.
•
With the power on, press the
RESET
button with an opened paper clip
for less than 10 seconds, or until the lights go off.
–
When all the lights go off, release the
RESET
button.
–
Release the
RESET
button as soon as the lights go off, or you will
restore the Cisco WAP150 to factory default settings and lose your
configurations.
To reset the Cisco WAP150 to factory default settings:
•
With the power on, press and hold the
RESET
button with an opened
paper clip for more than 10 seconds.
–
All of the lights will go off.
–
Release the
RESET
button when the power light turns on.
8
