background image

2

Cisco WAP150 Quick Start Guide

Welcome

Thank you for choosing the Cisco WAP150 Wireless-AC/N Dual Radio 
Access Point with PoE. The Cisco WAP150 is an indoor concurrent dual-
band radio 802.11ac and 802.11n access point with Power over Ethernet 
(PoE). -PoE Supplied by UL Listed I.T.E.

This guide provides the general layout of the Cisco WAP150, describe how 
to deploy the Cisco WAP150 in your network, and describe how to 
configure the Cisco WAP150. For additional information, see 

www.cisco.com/go/100_wap_resources

.

Package Contents

Wireless Access Point

Power Adapter

This Quick Start Guide

Ethernet Cable

Technical Support Contact

Pointer Card China RoHS

EU Directives 1999/5/EC Compliance Information (for EU SKU only)

Before You Begin

Before you begin the installation, make sure that you have the following 
equipment and services: 

A computer with browser support for:

Internet Explorer 7.0 or later

Chrome 5.0 or later

Firefox 3.0 or later

Safari 3.0 or later

Tools for installing the hardware

FindIt tool for locating the access point

One or more Ethernet network switches with PoE

Mobile devices (iPhone, Android, etc.) via wireless setup SSID. 
(Configure via Wi-Fi mobile device with a web browser.)

1

Summary of Contents for WAP150













Reviews: