5-17
Cisco VG248 Analog Phone Gateway Software Configuration Guide
OL-1209-02
Chapter 5 Integrating Cisco CallManager with Voice Mail Systems Using SMDI
Configuring VG248 SMDI Ports in Cisco CallManager
Step 5
Enter the MAC address in the MAC address field.
Each port must have a unique MAC address. Use this formula to calculate the
MAC address for each port.
•
The first two digits of the MAC address are dropped.
•
The number is shifted two places to the left.
•
The two-digit port number is added to the right.
For example, if the MAC address on the VG248 is 000039A44218
,
the MAC
address registered for port 12 in Cisco CallManager is 0039A4421812
Step 6
In the Directory Numbers list, click an unassigned line.
Step 7
Enter the settings described in
Table 5-3
Step 8
Click Update.
Table 5-3
Voice Mail Port Configuration Settings
Field
Description
Directory Number
Enter the directory number for this voice mail port. The first port
must be assigned the directory number identified as the pilot
directory number on the VG248 (see the
“Identifying the First
Voice Mail Port Number” section on page 5-21
) and defined as the
VoiceMail number in Service > Service Parameters in
Cisco CallManager. For ease of managing these ports, assign
consecutive directory numbers to the remaining voice mail ports.
Call Waiting
Set this to Off to disable it on each of the voice mail ports.
Forward Busy
Enter the directory number for the next VG248 voice mail port on
the SMDI chain. For example, if the directory number for this port
is 75001, enter 75002 to forward to the next available port.
Forward No Answer
Enter the directory number for the next VG248 voice mail port on
the SMDI chain. For example, if the directory number for this port
is 75001, enter 75002 to forward to the next available port.
