2-13
Cisco VG248 Analog Phone Gateway Software Configuration Guide
OL-1209-02
Chapter 2 Getting Started with the VG248
Configuring SNMP Settings
To set the community strings, perform these steps:
Step 1
From the main menu, choose Configure.
Step 2
Choose SNMP.
Step 3
To set the read-only community string, choose Read-only community string.
Step 4
To set the read-write community string, choose Read-write community string.
Step 5
Enter the community string value.
Configuring Contact Information
You can enter the contact name of the person responsible for the VG248 and the
location of the VG248 on your campus.
Configuring Contact Name
The contact name on the VG248 corresponds to the sysContact variable defined
in RFC 1213.
To add a contact name indicating the person responsible for the VG248, perform
these steps:
Step 1
From the main menu, choose Configure.
Step 2
Choose SNMP.
Step 3
Choose Contact name.
Step 4
Enter the name of the person responsible for the VG248.
