Cisco Unity, Installation Manual, Page: 58 / 188

UNITY INSTALLATION GUIDE
50
Installing Windows
Continued
NT Server
i
Follow the on-screen prompts until prompted to select a
server type:
PDC For the Unity server, click if the server will be a
stand-alone voice messaging server or if you want to create
a new domain. For the ActiveFax server, click if you want to
create a new domain.
Backup domain controller
Do not set up the Unity or
ActiveFax server as a backup domain controller. This config-
uration is not supported.
Stand-alone (member) server Click if the Unity or Active-
Fax server will be a member server in an existing domain.
j
Follow the on-screen prompts until you are prompted to
install Microsoft Internet Information Server.
k
Clear the “Install Microsoft Internet Information Server”
check box, then click “Next” to continue.
l
Follow the on-screen prompts to complete the installation.
To install Windows NT Service Pack 3
a
Log on to Windows NT.
b
Insert the Microsoft Windows NT Server Option Pack com-
pact disc in the CD-ROM drive.
c
Browse to the directory WinntSP3\i386.
d
Run Nt4sp3_i.exe.
e
Follow the on-screen prompts until you are prompted to cre-
ate an uninstall directory.
f
Click the “No, I do not want to create an uninstall directory”
check box.
g
Follow the on-screen prompts until a dialog box appears
explaining that 128-bit security will be replaced with 40-bit
security.
h
Click “Replace.” Another dialog box appears, also discussing
128-bit and 40-bit security.
i
Click “Replace.”
NOTE:
128-bit security will be restored when you install
Windows NT Server Service Pack 6a.