Cisco Unity Installation Manual Download Page 116

Page: 116 / 188

UNITY INSTALLATION GUIDE

108

Upgrading a Unity or

Continued

ActiveFax server

To upgrade the Unity and ActiveFax software on the
Unity server

Do this procedure if you are:

◆

Upgrading Unity and ActiveFax software to version 2.4.

◆

Adding or changing voice boards, even if you are adding
boards of the same type.

NOTE:

When you upgrade the Unity software, any diagnostic

traces that were turned on are automatically turned off.

Confirm that the Unity system key is connected to the Unity

server.

Confirm that all voice and fax boards have been installed

and set up according to the “Hardware settings” instruc-
tions for your boards in Appendix A.

If you are installing a component system and the server
contains Dialogic D/41D or D/42-NE2 ISA voice boards,
note the setting of jumper JP1 (IRQ setting) because you
must enter that value at the end of the Setup program.

Start the Unity server.

Log on to Windows NT/2000 by using the account you chose

to use for installation. For more information, see “The
account used for installation on the Unity server,” on
page 69.

Insert the Unity compact disc in the CD-ROM drive.

Browse to the root directory of the Unity compact disc, and

run Setup.exe.

Choose the language in which you want to view Setup

prompts, and click “OK.” A welcome message appears.

Click “Next,” and Setup examines your system to confirm

that the required software is installed and configured prop-
erly, and that a system key is installed.

If an error message appears, correct the specified problem,
then rerun Setup.

Follow the on-screen prompts.

Summary of Contents for Unity





























































































































































































Search results

Summary of Contents for Unity

Reviews:

Related manuals for Unity

Brands by name

Popular brands

Cisco Unity, Installation Manual

Search results

Summary of Contents for Unity

Reviews:

Related manuals for Unity

Brands by name

Popular brands