Status Module
Networks
Cisco Unified Communications UC320W Administration Guide
89
11
•
To remove a PMF:
Click the delete button (X) for the file that you want to
remove. When the confirmation message appears, click
OK
to delete the
file, or click
Cancel
to keep the file.
Note:
Changes are not applied until you apply the configuration.
SPA8800 IP Telephony Gateway Status
The MAC address appears. Green bars indicate the status of the configuration:
Configurable, Configured, and Registered.
Phones
•
Phone:
The phone model and MAC address.
•
Phone status icons:
Green bars indicate the status of the configuration:
Configurable, Configured, and Registered.
Note:
A yellow circle containing a minus sign indicates that the device
previously was active, but its current state is unknown.
•
User:
The user to whom this phone is assigned. The primary personal
extension number also appears here.
•
Reset Lock Code:
Click this button to reset the phone password for the
user. The user's phone will be unlocked and the password will be cleared.
When the confirmation message appears, click
Reset
to continue, or click
Cancel
to close the message without resetting the password.
•
Configuration status icons:
The green bars on the right side of the page
show the current configuration status: 1 bar = Configurable, 2 bars =
Configured, and 3 bars =Registered.
Networks
Use the
Status > Networks
page to view statistics for the WAN, wireless network,
and LAN.
This page refreshes every 15 seconds.
Clear Counters:
Click this button to reset all statistics on this page to 0. The
counters are cleared the next time that the page refreshes.
WAN
•
WAN IP Address:
The public IP address of this interface.
