manualshive.com logo in svg

Cisco UNIFIED COMMUNICATIONS UC320W, Administration Manual

Share
Download
Cisco UNIFIED COMMUNICATIONS UC320W Administration Manual Download Page 109

Installing the UC 320W and Phones

Installing a Desk Stand (Optional)

Cisco Unified Communications UC320W Administration Guide

109

B

 

5.

Phone port:

 Use this port to connect the phone cord for the handset. Connect 

the other end of the phone cord into port on the bottom of the handset (not 
shown).

6.

Power port: 

Use this port to connect the supplied power cord. Note: This phone 

can receive power over Ethernet only if a Cisco POES5 5-Volt Power Over 
Ethernet Splitter accessory is connected.

7.

Side car Attachment features (not illustrated):

 See 

Connecting Attendant 

Consoles, page 119

.

Installing a Desk Stand (Optional)

A desk stand is provided with each Cisco IP phone. The stand can be easily 
attached or removed.

NOTE

•

Do not attach the desk stand if you want to mount the phone to the wall. See 

Mounting a Phone to a Wall (Optional), page 110

. 

•

If you plan to attach a Cisco SPA500S attendant console, attach it before 
attaching the desk stand. See 

Connecting Attendant Consoles, page 119

.

STEP 1

Connect the phone stand by lining up the tabs on the stand with the slots on the 
phone body. 

STEP  2

Slide the bottom tabs into the lower slots on the phone body and lightly press 
down on the stand. It should easily slide into the upper stand slots. Do not force.

Summary of Contents for UNIFIED COMMUNICATIONS UC320W





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands