Welcome
Configuration Module Overview
Cisco Unified Communications UC320W Administration Guide
14
1
•
Returning to the Getting Started menu:
Until you apply the configuration,
you can return to the Getting Started menu by clicking the
Getting Started
button in the menu bar.
•
Starting over:
To restart in initial setup mode, click the
New
button in the
menu bar.
Note:
Creating a new configuration will reinitialize your
configuration settings. To reset the Cisco UC320W to the factory default
settings, press and hold the Reset button for 10 seconds.
•
Viewing the Status pages:
To view system status information, click the
Status
button in the menu bar.
Data Entry in the Configuration Module
•
Show/hide buttons:
To simplify the display, some features are hidden until
you need to use them. As you start entering information on a page,
additional features may appear. Several pages include buttons that you can
click to show or hide fields.
•
Scrolling:
On some pages, you may need to use the vertical or horizontal
scroll bars to view all of the fields.
•
Required fields:
Required fields are indicated by an icon next to the field
name.
•
Errors:
If you omit required information or enter invalid information, an error
message appears. A red X icon also appears next to the field and in the
navigation bar next to the name of the configuration page. You can click the
Next
button to continue without fixing the errors, but you will not be able to
apply the configuration until the errors are resolved.
•
Applying a new configuration:
At the end of the initial setup process, the
Apply Configuration page appears. If any errors appear, resolve them. Then
apply the configuration and wait for all devices to restart with the new
settings. Your settings are not applied to the devices until you complete this
task.
•
Working from an existing configuration:
After applying a configuration,
you can view the Status pages or use the Configuration module to review
and update your settings. When you are ready to apply your changes, click
the
Apply Configuration
link near the lower right corner of the page, or click
the
Apply Changes > Apply Configuration
link in the navigation tree. If any
errors appear, resolve them. Then apply the configuration and wait for all
devices to restart with the new settings. Your settings are not applied to the
devices until you complete this task.
