3-4
Cisco UCS Invicta C3124SA Appliance Installation Guide
OL-31369-01
Chapter 3 Connecting the Cisco UCS Invicta C3124SA Appliance to the Network
Step 1
Choose Option “2,” Network Settings and choose
<OK>
.
The
Network Settings
menu appears.
Step 2
Choose Option “1,” Bonds, and choose
<OK>.
The
Bonds
Menu appears.
Step 3
Choose the name of the bond to edit (bond0) and choose <
OK>
.
Step 4
Choose Option “2” to edit a specific bond and choose
<OK>
.
Step 5
The
Edit Bond
screen appears.
The
Edit
Bond
Information
screen appears.
Step 6
Press
<Tab>
to focus on the form and edit any of the following:
Note
<UP/DOWN (
)> navigates between list items.
•
IP Address
•
Subnet Mask
•
MTU
•
Mode
•
Set on Boot? (yes/no) – YES. This function informs the OS that this bond is to come online during
the boot process.
Note
Use the following default IP addresses for bond0:
•
Bond0: 192.168.10.1
•
Netmask: 255.255.255.0
The Default Gateway or DNS must be customer configured.
Step 7
Press
<Tab>
and then choose <
OK>
when bond edits are complete.
The confirmation screen appears if edits are successful.
Step 8
Choose
<OK>.
The
Bonds
menu appears.
Step 9
Choose <
Back
> to return to
the Network Settings
menu.
The
Network Settings
menu appears.
Step 10
Choose Option “4” to enter the Default Gateway.
The
Edit Default Gateway
appears.
Step 11
Press
<Tab
> to move cursor focus and enter the new Default Gateway.
Step 12
Press
<Tab>
and choose
<OK>
.
A confirmation screen appears if the gateway was successfully updated.
Note
The IP gateway change does not take effect until the device is rebooted (or logged in as root and services
are restarted).