2-8
Cisco UCS Invicta C3124SA Appliance Installation Guide
OL-31369-01
Chapter 2 Installing the Cisco UCS Invicta C3124SA Appliance
Installing the Cisco UCS Invicta C3124SA Appliance In a Rack
Step 3
Change the IP address and Mask to those provided by the customer.
Caution
Do not change the CIMC mode or passwords. Cisco Technical Support will not have access to the device
if configurations are changed.
Step 4
Repeat Steps 1-3 for each SSR and SSN in the Cisco UCS Invicta Scaling System.
Note
Customers need to create a record of all the IP addresses used, using labels or other means.
After Steps 1-4 are completed, the management port is ready to be connected to the customer network.
Connectivity
There are four kinds of connectivity for the Cisco UCS Invicta
C3124SA
Appliance, as described in
Table 2-1
.
Note
Cables are not included and need to be ordered separately.
Table 2-1
Cisco UCS Invicta C3124SA Connectivity
Connectivity Type
Invicta Connectivity
Upstream Switch Connectivity
Fibre Channel
N2XX-AQPCI05 dual-port 8Gb
Fibre Channel adapter comes
with preinstalled 8G SW SFP+
transceivers
Compatible cable: 50
μ
m
multimode fiber cable
•
Short-wave 850nm 2G, 4G,
8G Fibre Channel.
•
Cisco DS-SFP-FC8G-SW
•
Cisco MDS 9000 and Cisco
Nexus series switches with
Unified Ports set to FC
mode.
•
Compatible 3
rd
party Fibre
Channel switches are listed
in the Cisco UCS Hardware
and Software
Interoperability Documents.
Note
The Cisco UCS Invicta
3124SA Appliance
comes with preinstalled
8G FC transceivers.
Ethernet over Fiber (iSCSI only) N2XX-AIPCI01 dual-port 10Gb
SFP+ Ethernet adapter
Compatible cable: 50
μ
m
multimode fiber cable
Compatible optical transceiver:
SFP-10G-SR