C-2
Cisco uBR905 Router Hardware Installation Guide
OL-0598-01 (9/2000)
Appendix C Regulatory Compliance and Safety Information
Agency Approvals for the Cisco uBR905
•
Cisco Connection Online (CCO)
You can also access Cisco documentation on the World Wide Web at http://www.cisco.com,
http://www-china.cisco.com, or http://www-europe.cisco.com. If you are reading Cisco product
documentation on the World Wide Web, you can submit comments electronically. Click Feedback
in the toolbar and select Documentation. After you complete the form, click Submit to send it to
Cisco. We appreciate your comments.
•
For hardware installation and configuration information on the Cisco uBR905, see the
Cisco uBR905 Cable Access Router Hardware Installation Guide, Cisco uBR905 Cable Access
Router Software Configuration Guide, and the Cisco uBR905 Cable Access Router Installation and
Startup Quick Start Guide.
•
For Cisco IOS software configuration information, refer to the feature modules and modular
configuration and command reference publications in the Cisco IOS software configuration
documentation set.
•
To obtain general information about documentation, see CCO or the customer documentation
CD-ROM, or call customer service at 800 553-6387 or 408 526-7208. Customer service hours are
5:00 a.m. to 6:00 p.m. Pacific time, Monday through Friday (excluding Cisco-observed company
holidays). You can also send e-mail to [email protected]. You can also refer to the
Cisco Information Packet that shipped with your router.
Subscribers (End Users)
For subscribers, the Cisco uBR905 Cable Access Router Subscriber Setup Quick Start card describes
how to connect the Cisco uBR905 to the service provider’s network. This document ships with each
Cisco uBR905 cable access router. If you are a subscriber, review this document, along with any other
document your service provider gives you.
To obtain support, contact your service provider. Before contacting your service provider, note the MAC
address and the UID found on a label at the bottom of your Cisco uBR905 cable access router.
Agency Approvals for the Cisco uBR905
•
Safety: UL 1950, CSA 22.2 No.950, EN60950, IEC 60950, AS/NZS3260, TS001
•
EMI: EN50082-1:1992, EN55022:1994 Class B, AS/NZS 3548:1995, VCCI 3197.04 Class B, 47
CFR 15 Subpart B, 1997 Class B
Safety Information
Following are safety instructions that you must follow when installing a Cisco uBR905. Failure to
install the unit in accordance with these instructions will invalidate the agency approvals for the
Cisco uBR905 router.
General Safety
•
Do not work on the system or connect and disconnect cables during a lightning storm.
