manualshive.com logo in svg

Cisco TelePresence SX20, Reference Manual

Share
Download
Cisco TelePresence SX20 Reference Manual Download Page 92

D14949.13 

SX20 Codec API Reference Guide TC7.3, OCTOBER 2015. 

Copyright © 2015 Cisco Systems, Inc. All rights reserved. 

92

Cisco TelePresence SX20 Codec

API Reference Guide

Call commands

xCommand Call Accept

Accept an incoming call. If no CallId is specified, all incoming calls are accepted. The CallID is 

returned when the xCommand Dial command is run. During the call you can run the xStatus Call 

command to see the CallId. CallType parameter is not in use.

Requires user role:

 USER

Parameters: 

CallId: <0..65534>
CallType: <Audio/Video> Not in use.

Example: 

xCom mand Call Accept CallId:19

xCommand Call Disconnect

Disconnect a call. The CallID is returned when the xCommand Dial command is run. During the call 

you can run the xStatus Call command to see the CallId.

Requires user role:

 USER

Parameters: 

CallId(r): <0..65534>

Example: 

xCom mand Call Disconnect CallId:17

xCommand Call DisconnectAll

Disconnect all active calls.

Requires user role:

 USER

Example: 

xCom mand Call DisconnectAll

xCommand Call ExtendConference

Request to extend the conference for the call with the specified CallId. 
For this command to apply, the following are required: 
1) The result from the xStatus Conference Site <CallId> ConferenceExtended must be NotExtended: 

*s Conference Site <CallId> ConferenceExtended: NotExtended
2) The following tag from the bookings list command must have a value > 0: 
*r Bookings Booking <bookingNumber> MaximumMeetingExtension: "30"
Note: The command returns the result from the command itself, not the result from the extension 

request to far end. A separate event returns the result from the extension request. 
CallId: CallId for the call in question.

Requires user role:

 USER

Parameters: 

CallId(r): <0..65534>

Example: 

xCom mand Call ExtendConference CallId: 1

xCommand Call Hold

Put a call on hold. The CallID is returned when the xCommand Dial command is run. During the call 

you can run the xStatus Call command to see the CallId.

Requires user role:

 USER

Parameters: 

CallId(r): <0..65534>
Reason: <Conference/Transfer/Other>

Example: 

xCom mand Call Hold CallId:19

xCommand Call HoldAll

Puts all ongoing calls on hold.

Requires user role:

 USER

Parameters: 

Reason(0): <Conference/Transfer/Other>

Example: 

xCom mand Call HoldAll

Contents

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

xCommand

Summary of Contents for TelePresence SX20



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands