Cisco TelePresence SX20 Reference Manual Download Page 65

Page: 65 / 218

D14949.13

SX20 Codec API Reference Guide TC7.3, OCTOBER 2015.

Cisco TelePresence SX20 Codec

API Reference Guide

xConfiguration SIP Profile [1..1] Line

When registered to a Cisco Unified Communications Manager (CUCM) the endpoint may be part

of a shared line. This means that several devices share the same directory number. The different

devices sharing the same number receive status from the other appearances on the line as defined

in RFC 4235.
Note that shared lines are set up by CUCM, not by the endpoint. Therefore do not change this

setting manually; CUCM pushes this information to the endpoint when required.

Requires user role:

ADMIN

Value space:

Shared:

The system is part of a shared line and is therefore sharing its directory number with other

devices.

Private:

This system is not part of a shared line (default).

Example:

xConfiguration SIP Profile 1 Line: Private

Standby configuration

xConfiguration Standby Control

Determine whether the system should go into standby mode or not.

Requires user role:

ADMIN

Value space:

Off:

The system will not enter standby mode.

On:

Enter standby mode when the Standby Delay has timed out. Requires the Standby Delay to be

set to an appropriate value.

Example:

xConfiguration Standby Control: On

xConfiguration Standby Delay

Define how long (in minutes) the system shall be in idle mode before it goes into standby mode.

Requires the Standby Control to be enabled.

Requires user role:

ADMIN

Value space:

<1..480>

Range:

Select a value between 1 and 480 minutes.

Example:

xConfiguration Standby Delay: 10

xConfiguration Standby BootAction

Define the camera position after a restart of the codec.

Requires user role:

ADMIN

Value space:

<None/Preset1/Preset2/Preset3/Preset4/Preset5/Preset6/Preset7/Preset8/

Preset9/Preset10/Preset11/Preset12/Preset13/Preset14/Preset15/RestoreCameraPosition/

DefaultCameraPosition>

None:

No action.

Preset1 to Preset15:

After a reboot the camera position will be set to the position defined by the

selected preset.

RestoreCameraPosition:

After a reboot the camera position will be set to the position it had before

the last boot.

DefaultCameraPosition:

After a reboot the camera position will be set to the factory default

position.

Example:

xConfiguration Standby BootAction: DefaultCameraPosition

Contents

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

xConfiguration

Summary of Contents for TelePresence SX20



























































































































































































































Search results

Summary of Contents for TelePresence SX20

Reviews:

Brands by name

Popular brands

Cisco TelePresence SX20, Reference Manual

Search results

Summary of Contents for TelePresence SX20

Reviews:

Brands by name

Popular brands