Cisco TelePresence IX5000, Installation Manual

Page: 124 / 186

Installing the Second Row Table (IX5200 Only)
Page 124
© 2015 Cisco Systems, Inc. All rights reserved.
Required Parts Cont’d
Tabletops (700-45242-xx far right, 700-45239-xx far left, 700-103970-xx second
from right, 700-103971-xx second from left, 700-45241-xx mid-right, 700-45240-
xx mid-left)
20x Biscuit joiner, 700-23909-xx
10x Half moon bolt, M6X80MM, 51-6068-xx
10x Joint plate, 700-23345-xx
102x M8x16mm screws, black 69-2802-xx
Mute button covers (3x 700-45426-xx, 3x 700-45427-xx)
24x M4x10mm black screws 69-2817-xx
14x leg PET panels (2x outside panels 700-43424-xx, 6x right inside panels 700-
43426-xx, 6x left inside panels 700-43427-xx
6x front panel covers (3x 700-43502-xx, 3x 700-43005-xx
Velcro cable straps 52-0449-xx as needed
Required Tools
• #4 and #2 Philips screwdrivers
• 7mm & 10mm socket
• 7mm Allen driver or wrench
• 10mm ratcheting wrench or socket
• Laser level
Required Cables
69-2833-xx cabling kit, includes the following subkits:
69-2670-xx, includes 2x Ethernet cables 37-1558-xx and 37-1534-xx,
EX2
and
EX3
69-2672-xx, includes 13x Ethernet cables 37-1558-xx C7-C18, CX2
69-2675-xx (mic bar and mute button), includes:
• 2x DisplayPort-to-DisplayPort cables, 12 meter, 37-1541-xx, MC2 and MC3
• 12x Mini-DisplayPort-to-Mini-DisplayPort cables, 2.6 meters, 37-1542-xx, A7-
A18
69-2677-xx, includes 3x Jumper Cord, 2 meter, 37-0994-xx
Required Parts
7x Table legs (1x far left leg 800-44198-xx, 1x far right leg 800-44197-xx, 5X
inside legs 800-44200-xx)
21x M8x16MM screws 69-2802-xx
6x each Back row cable management assembly, left and right (3x 800-42717-
xx and 3x 800-42715-xx)
2x switches WS-C2960C-8PC-L
4x switch bracket 700-44758-xx
2x microphone connector (MCs) 800-40951-xx
2x Power distribution units (PDUs) 74-8655-xx
12x M6 nuts 49-100235-xx
4x #10-32 pan head screws 69-2818-xx
7x Metal trim pieces (700-103477-xx left corner, 700-103476-xx right corner,
700-45431-xx outside-left, outside right, and center, 700-45430-xx inside-left
and inside-right)
Ethernet/Power modules:
• 12x Power/Ethernet connectivity modules (part varies by country)
• 7x Power/Ethernet connectivity cover 700-47772-xx
• 2x Power/Ethernet connectivity blanking plates 700-45421-xx
• 28x #4-40 nuts for power/Ethernet connectivity brackets
62x M4x12mm screws 69-2801-xx
30x M4 countersunk screw 69-2817-xx
1x downspout kit (includes short round piece 700-46612-xx, long flat piece
700-46613-xx, 3x M4x10 screws 69-2817-xx, and 3x M6x10mm screws 69-
2803-xx)
6x Mute button assembly 74-12200-xx
12x M6x10mm screws 69-2803-xx
3x Microphone bars 74-12199-xx
*
3x Turnaround microphone bars 74-12552-xx *
* The packaging includes the mic bar and the center cap. Do not throw the
small round caps away.
Installing the Second Row Table (IX5200 Only)