manualshive.com logo in svg

Cisco TelePresence 3000, Installing And Removing

The Cisco TelePresence 3000 is an advanced video conferencing system that revolutionizes virtual meetings. This compact yet powerful device offers exceptional video and audio quality, effortlessly immersing participants in the virtual collaboration experience. Our website provides free downloads of user manuals, helping users easily navigate the process of installing and removing this cutting-edge product. Discover all the features and benefits of the Cisco TelePresence 3000 by downloading the manual from manualshive.com.

Share
Download
background image

 

26

OL-23393-01

Assembling the Kick Guards

This section describes the steps you perform to assemble the kick guards and includes the following 
topics:

•

Assembling the Kick Guards, page 26

•

Assembling the Kick Guard Subassemblies, page 26

Required Parts and Tools

•

1left kick guard sub-assembly

•

1 right kick guard sub-assembly

•

1 kick guard middle frame sub-assembly 

•

1 kick guard middle frame guide sub-assembly 

•

4 

M4 x 12 Pan Head Phillip Screw

•

#2 Phillips screwdriver

Assembling the Kick Guard Subassemblies

To prepare the kick guards, complete the following steps.

Place the right kick guard sub assembly into the slot of the kick guard middle frame guide sub-assembly 
and assemble them using 

M4 x 12 Pan Head Phillip Screws

. Follow the same procedure to assemble the 

left kick guard sub-assembly with kick guard middle frame sub-assembly. These kick guards attached to 
the bottom of the right screen and left screen respectively.

Make sure the curvature of the kick guard sub-assemblies are the same.

Summary of Contents for TelePresence 3000



























































Reviews:

No comments

Related manuals for TelePresence 3000

D-Link i2eye DVC-1000 Quick Installation G preview
i2eye DVC-1000
Brand: D-Link Pages: 6
DayTronic System 10 User Manual Book preview
System 10
Brand: DayTronic Pages: 414
Teac CD-X9 Owner'S Manual preview
CD-X9
Brand: Teac Pages: 24
TeachLogic Maxim III Installation Manual preview
Maxim III
Brand: TeachLogic Pages: 21
Panasonic SC-PMX9DB Quick Manual preview
SC-PMX9DB
Brand: Panasonic Pages: 1
Panasonic SC-AKX18 Operating Instructions preview
SC-AKX18
Brand: Panasonic Pages: 2
Panasonic SC-PM02 Operating Instructions preview
SC-PM02
Brand: Panasonic Pages: 2
Panasonic SC-PMX90 Owner'S Manual preview
SC-PMX90
Brand: Panasonic Pages: 20
Brähler Systems 05.0055 Instruction Manual preview
05.0055
Brand: Brähler Systems Pages: 25
B&B Molders Nautilus P1 Installation Instructions & Owner'S Manual preview
Nautilus P1
Brand: B&B Molders Pages: 18
Taiden HCS-3900 series Operating Manual preview
HCS-3900 series
Brand: Taiden Pages: 55
Guardian Audio IQ series Owner'S Manual preview
IQ series
Brand: Guardian Audio Pages: 4
Ruida Technology LFS-PM Series Operating Manual preview
LFS-PM Series
Brand: Ruida Technology Pages: 35
Toa DP-0202 Operating Instructions Manual preview
DP-0202
Brand: Toa Pages: 12
HEIDENHAIN TNC 150 B Manual preview
TNC 150 B
Brand: HEIDENHAIN Pages: 98
N-Com B802 Quick Manual preview
B802
Brand: N-Com Pages: 12
H&B HF-275 Operating Instructions Manual preview
HF-275
Brand: H&B Pages: 9
RCA RS2533 User Manual preview
RS2533
Brand: RCA Pages: 20

Brands by name

Popular brands

Load more brands