Multichannel STM-1 Port Adapter for the Cisco 7500 Series Router
mode
30
12.0(14)S
mode
To configure the mode of an E1 line that has been mapped to a TUG-3, use the
mode
controller
configuration tug3 command.
To configure the mode of an E1 line that has been mapped to a AU-3, use the
mode
controller
configuration au3 command.
Use the
no
form of this command to disable the mode configuration.
mode
{
c-12
}
[
no
]
mode
{
c-12
}
Syntax Description
Defaults
c-12
Command Modes
Configuration controller tug3 (for an E1 line mapped to a TUG-3)
Configuration controller au3 (for an E1 line mapped to an AU-3)
Command History
Usage Guidelines
You can configure each of the TUG-3s or AU-3s of a PA-MC-STM-1 to carry a set of TU-12s (E1s
mapped into TU-12s). The
mode c-12
command configures the mode of operation of a TUG-3 or AU-3
and specifies that the TUG-3 or AU-3 is divided into 21 TU-12s, each carrying an E1.
Examples
The following example configures the AUG-mapping of the SONET controller to AU-3 and specifies the
mode of AU-3 1 to c-12:
Router(config)# controller sonet 1/0/0
Router(config-controller)# aug mapping au-3
Router(config-controller)# au3 1
Router(config-ctrlr-au3)# mode c-12
The following example configures the AUG-mapping of the SONET controller to AU-4 and specifies the
mode of TUG-3 1 of AU-4 1 to c-12:
Router(config)# controller sonet 1/0/0
Router(config-controller)# aug mapping au-4
Router(config-controller)# au-4 1 tug-3 1
Router(config-ctrlr-tug3)# mode c-12
c-12
The TUG-3 or AU-3 is divided into 21 TU-12s, each carrying an E1.
Release
Modification
12.0(14)S
This command was introduced.
