Multichannel STM-1 Port Adapter for the Cisco 7500 Series Router
Configuration Tasks
10
12.0(14)S
Step 6
Router(config-ctrlr-au3)#
tug-2
tug-2-number
e1
e1-number
clock source
{
internal
|
line
}
Specifies the clock source to be used by the E1
line.
•
tug-2-number
—a number in the range of
1 to 7
•
e1-number
—a number in the range of 1 to 3
•
internal
—Specifies the PA-MC-STM-1 as
the clock source
•
line—
Specifies the E1 line as the clock source
Step 7
Router(config-ctrlr-au3)#
tug-2
tug-2-number
e1
e1-number
national bits
pattern
Configures the national reserved bits for the E1
line.
•
tug-2-number
—a number in the range of
1 to 7
•
e1-number
—a number in the range of 1 to 3
•
pattern—
The national reserved bit pattern is a
hexadecimal value in the range 0x0–0x1F
(hexadecimal) or 0-31 (decimal).
The default setting is 0x1F.
Step 8
Router(config-ctrlr-au3)# [
no
]
tug-2
tug-2-number
e1
e1-number
bert pattern
pattern
interval
time
Sends a BERT pattern on an E1 line.
•
tug-2-number
—a number in the range of
1 to 7
•
e1-number
—a number in the range of 1 to 3
•
pattern
:
–
2^11, pseudorandom test pattern (2048
bits long)
–
2^15, pseudorandom O.151 test pattern
(32,768 bits long)
–
2^20-O153, 2^20-1 O.153 test pattern
–
2^20-QRSS, pseudorandom QRSS O.151
test pattern (1048575 bits long)
•
time
—an interval in the range of 1 to14400
minutes
The default is no BER test configured.
