root
permissions are required to properly configure the Data Store
and Data Store compatibility.
l
When the password prompt appears, type
lan1cope
, and then press
Enter
.
l
At the next prompt, type
SystemConfig
, and then press
Enter
.
2.
If this is the first time you entered System Configuration on this appliance, First
Time Setup starts.
Otherwise, the System Configuration menu opens. Select
Management
, and
then press
Enter
.
3.
Enter an
IP address
for this appliance.
4.
Enter a
Netmask
for the network.
5.
Enter a
Gateway
address for this appliance's IP address.
6.
Enter a
Broadcast
address for the appliance.
7.
Enter a
Hostname
for your appliance.
8.
Enter a
Domain
for your appliance.
9.
Select
Select
, then select
Yes
to confirm your entries.
What to Do Next
l
Configure the appliance for use without a Data Store. See the next procedure for
more information.
Configure Data Store use
Configure your SMC 2210 or FC 4210 to work with a Data Store. Your Flow Collectors
will connect to the Data Store, and your SMC will query the Data Store.
After you choose to configure your SMC or Flow Collector for use with a Data
Store, you cannot update the appliance's configuration to change this. You
must RFD the appliance if you select the wrong choice. Enable this
only if
you
plan to deploy a Data Store to your network.
You must configure all of your SMCs and Flow Collectors for use with a Data
Store if you deploy a Data Store. You cannot configure some of your Flow
Collectors to connect to the Data Store and others to connect directly to the
SMC.
Before You Begin
© 2021 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- 76 -
Appendix B. Stealthwatch Hardware Installation
