manualshive.com logo in svg

Cisco SPS2024, Reference Manual, Page: 378 / 552

Share
Download
Cisco SPS2024 Reference Manual Download Page 378

Spanning Tree Commands

spanning-tree pathcost method

SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide

376

28

 

Command Modes 

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

There are no user guidelines for this command.

Example

The following example enables shared spanning-tree on Ethernet port e5.

Console(config)# interface ethernet e15

Console(config-if)# spanning-tree link-type shared

spanning-tree pathcost method

The spanning-tree pathcost method Global Configuration mode command sets 
the default path cost method. Use the no form of this command to return to the 
default configuration.

Syntax

spanning-tree pathcost method {long | short} 

no spanning-tree pathcost method 

Parameters

•

long —  Specifies port path costs with a range of 1-200,000,000.

•

short — Specifies port path costs with a range of 0-65,535.

Default Configuration

Short path cost method.

Summary of Contents for SPS2024









































































































































































































































































































































































































































































































































































Reviews:

No comments