manualshive.com logo in svg

Cisco SPS2024, Reference Manual, Page: 281 / 552

Share
Download
Cisco SPS2024 Reference Manual Download Page 281

QoS Commands

set

SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide

279

23

 

set

The set Policy-map Class Configuration mode command sets new values in the IP 
packet.

Syntax

set {dscp 

new-dscp 

| queue 

queue-id 

| cos 

new-cos

}

no set

Parameters

•

new-dscp

 — Specifies a new DSCP value for the classified traffic. (Range: 

0-63)

•

queue-id

 — Specifies an explicit queue ID for setting the egress queue.

•

new-cos

 — Specifies a new user priority for marking the packet. (Range: 0-

7)

NOTE

NOTE: In SPS2xx ‘set cos’ command will not affect regular IP traffic, it will affect only 
non IP traffic, unless the outgoing port is Gigabit port

Default Configuration

This command has no default configuration.

Command Mode

Policy-map Class Configuration mode

User Guidelines

This command is mutually exclusive with the trust Policy-map Class Configuration 
command within the same policy map.

Summary of Contents for SPS2024









































































































































































































































































































































































































































































































































































Reviews:

No comments