manualshive.com logo in svg

Cisco SPS2024, Reference Manual, Page: 318 / 552

Share
Download
Cisco SPS2024 Reference Manual Download Page 318

RMON Commands

show rmon statistics

SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide

316

25

 

Collisions

The best estimate of the total number of collisions on this 
Ethernet segment.

Undersize Pkts

The total number of packets received, less than 64 octets long 
(excluding framing bits, but including FCS octets) and 
otherwise well formed.

Oversize Pkts

The total number of packets received, longer than 1518 octets 
(excluding framing bits, but including FCS octets) and 
otherwise well formed.

Fragments

The total number of packets received, less than 64 octets in 
length (excluding framing bits but including FCS octets) and 
either a bad Frame Check Sequence (FCS) with an integral 
number of octets (FCS Error) or a bad FCS with a non-integral 
number of octets (Alignment Error).

Jabbers

The total number of packets received, longer than 1518 octets 
(excluding framing bits, but including FCS octets), and either a 
bad Frame Check Sequence (FCS) with an integral number of 
octets (FCS Error) or a bad FCS with a non-integral number of 
octets (Alignment Error).

64 Octets

The total number of packets (including bad packets) received 
that are 64 octets in length (excluding framing bits but 
including FCS octets).

65 to 127 Octets

The total number of packets (including bad packets) received 
that are between 65 and 127 octets in length inclusive 
(excluding framing bits but including FCS octets).

128 to 255 Octets

The total number of packets (including bad packets) received 
that are between 128 and 255 octets in length inclusive 
(excluding framing bits but including FCS octets).

256 to 511 Octets

The total number of packets (including bad packets) received 
that are between 256 and 511 octets in length inclusive 
(excluding framing bits but including FCS octets).

512 to 1023 
Octets

The total number of packets (including bad packets) received 
that are between 512 and 1023 octets in length inclusive 
(excluding framing bits but including FCS octets).

1024 Octets to 
max

The total number of packets (including bad packets) received 
that were between 1024 and maximum frame size in length 
inclusive (excluding framing bits but including FCS octets).

Field

Description

Summary of Contents for SPS2024









































































































































































































































































































































































































































































































































































Reviews:

No comments