manualshive.com logo in svg

Cisco SPS2024, Reference Manual, Page: 253 / 552

Share
Download
Cisco SPS2024 Reference Manual Download Page 253

Management ACL Commands

deny (management)

SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide

251

19

 

deny (management)

The deny Management Access-List Configuration mode command defines a deny 
rule.

Syntax

deny ip-source 

ip-address 

[mask 

mask

 | 

prefix-length

] 

Parameters

•

ip-address

 — A valid source IP address.

•

mask

 — A valid network mask of the source IP address.

•

prefix-length

 — Specifies the number of bits that comprise the source IP 

address prefix. The prefix length must be preceded by a forward slash (/). 
(Range: 0-32)

•

vlan

 — The VLAN number.

•

port-channel

 — The port-channel number.

•

service

 — The service type condition.

Default Configuration

This command has no default configuration.

Command Mode

Management Access-list Configuration mode

User Guidelines

The system supports up to 128 management access rules.

Summary of Contents for SPS2024









































































































































































































































































































































































































































































































































































Reviews:

No comments