Home
/
Cisco
/
SPS2024
/
Reference Manual

Cisco SPS2024, Reference Manual, Page: 155 / 552

Share

Page: 155 / 552

Cisco SPS2024 Reference Manual Download Page 155

Ethernet Configuration Commands

description

SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide

153

12

description

The description Interface Configuration (Ethernet, port-channel) mode command
adds a description to an interface. Use the no form of this command to remove the
description.

Syntax

description

string

no description

Parameters

•

string

— A comment or a description of the port to allow the user to

remember the purpose of the interface. (Range: 1-64 characters)

Default Configuration

The interface does not have a description.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

There are no user guidelines for this command.

Example

The following example adds a description to Ethernet port e5.

Console(config)# interface ethernet e5

Console(config-if)# description “RD SW#3”

«
...
153
154
155
156
157
...
»

Summary of Contents for SPS2024









































































































































































































































































































































































































































































































































































Reviews:

No comments