![background image](http://html.mh-extra.com/html/cisco/smart-connected/smart-connected_reference-manual_67742014.webp)
14
Cisco Smart+Connected Portable Tablet Reference Guide
OL-27364-01
Configuration
Connect to Director from the Cisco Portable Tablet
Note
The touchscreen’s controls are auto-populated by a project on the Cisco Controller to which it connects.
If the subsystem buttons are not lit, and no default room displays on the touchscreen, you are not
connected to a Cisco Controller. Ensure that the devices are added to Composer Pro and identified in the
project. See the
“Composer Pro Configuration” section on page 15
for details.
Procedure
Step 1
On the Home page, tap
More
>
Settings
.
Step 2
Tap
Director
.
Step 3
If the Director page does not display, the Director view has probably been disabled; you must provide a
password to enable it.
•
If you need the password, contact your Cisco reseller.
•
If you have the password, tap
Config
>
Disable View
, enter the password, and then tap
Director
to
deselect it. Tap the
Director
button again, and view the
Director
page.
Step 4
In the Director list of IP addresses, tap the Cisco Controller’s IP address. The screen displays the current
connections (
Figure 1-10
).
Figure 1-10
Cisco Controller Address
Step 5
Verify that the Name, IP Address, and default location (room) display on the Cisco Portable Tablet to
ensure all of the correct connections.