10
Cisco Smart+Connected Portable Tablet Reference Guide
OL-27364-01
Portable or Tabletop Installation Options
Figure 1-7
Back View with Power Connections
Note
•
If you use Ethernet and undock the Cisco Portable Tablet, you will lose connectivity.
•
The power cord angles to the right and is held by the retaining clip. When you insert the power cord,
it also snaps into the retaining clip.
Step 3
Insert the Cisco Portable Tablet into its docking station.
Step 4
Wake up the Cisco Portable Tablet by touching the screen or pressing any button.
Using the Cisco Portable Tablet as a Tabletop Device
Procedure
Step 1
Place the docking station on a flat surface.
Step 2
Power the device using either a power cable or a Power over Ethernet (PoE) connection.
a.
Insert the power cable into the power jack slot on the back of the device (see
Figure 1-7
).
b.
Plug the power cord into a wall outlet.
c.
To use Ethernet, plug the RJ-45 connector into the PoE connector (such as a Cisco SF302-08P
Switch) and then into the Ethernet jack on the back of the docking station (see
Figure 1-7
).