Chapter 4 Installation and Maintenance
Installing the SCE 2000 Platform
Cisco SCE 2000 4/8xFE Installation and Configuration Guide
OL-7826-05
4-7
Attaching the Brackets to the SCE 2000
Before installing the
SCE 2000
in the rack, you must first install an appropriate rack-mount
bracket on each side of the front of the
SCE 2000
, as illustrated in the following figure. See
Tools
and Parts Required
(on page
4-2
) for a listing of the parts and tools required for installing the
rack–mount.
To install the rack-mount brackets on the
SCE 2000
chassis, complete the following steps:
Step 1
Align the rack-mount bracket to the side of the
SCE 2000
. Choose the proper bracket for your
installation (2-post rack or 4-post rack) as illustrated in
Rack-Mounting a SCE 2000 Platform
(on
page
4-6
).
Step 2
Insert and tighten three screws.
Figure
4-4: Attaching the Mounting Brackets (4-post)
Figure
4-5: Attaching the Mounting Brackets (2-post)
Step 3
Repeat steps 1 and 2 on the other side of the
SCE 2000
.
This completes the steps for attaching the rack-mount brackets to the
SCE 2000
.
If mounting the
SCE 2000
in a rack with only two posts, skip to
Mounting the System to a Rack
(on page
4-9
).
If mounting the
SCE 2000
in a rack with four posts, proceed to the next step to attach the crossrail
supports to the rack.
