xxxi
Cisco MGX Route Processor Module (RPM-XF) Installation and Configuration Guide
OL-13644-01
About This Guide
Cisco MGX 8230 Edge Concentrator Overview, Release 1.1.3
DOC-7812899=
Describes the system components and function of the
Cisco MGX 8250 edge concentrator.
Cisco MGX 8230 Multiservice Gateway Command Reference,
Release 1.1.3
DOC-7811211=
Provides detailed information on the general command line
interface commands.
Cisco MGX 8230 Multiservice Gateway Error Messages,
Release 1.1.3
DOC-78112113=
Provides error message descriptions and recovery
procedures.
Cisco MGX 8250 Edge Concentrator Installation and
Configuration, Release 1.1.3
DOC-7811217=
Provides installation instructions for the Cisco MGX 8250
edge concentrator.
Cisco MGX 8250 Edge Concentrator Overview, Release 1.1.3
DOC-7811576=
Describes the system components and function of the
Cisco MGX 8250 edge concentrator.
Cisco MGX 8250 Multiservice Gateway Command Reference,
Release 1.1.3
DOC-7811212=
Provides detailed information on the general command line
interface commands.
Cisco MGX 8250 Multiservice Gateway Error Messages,
Release 1.1.3
DOC-7811216=
Provides error message descriptions and recovery
procedures.
Cisco MGX 8800 Series Switch Command Reference, Release
1.1.3
DOC-7811210=
Provides detailed information on the general command line
for the Cisco MGX 8850 (PXM1), Cisco MGX 8250, and
Cisco MGX 8230 edge concentrators.
Cisco MGX 8800 Series Switch System Error Messages,
Release 1.1.3
DOC-7811240=
Provides error message descriptions and recovery procedures
for Cisco MGX 8850 (PXM1), Cisco MGX 8250, and
Cisco MGX 8230 edge concentrators.
Cisco MGX 8800/8900 Hardware Installation Guide,
Releases 2 - 5.2
Describes how to install the Cisco MGX 8950, the
Cisco MGX 8850 (PXM1E/PXM45), the Cisco MGX
8850/B (PXM1E/PXM45), and the Cisco MGX 8830
switches. Also describes how to install the MGX 8880 Media
Gateway. This document explains what each switch does and
covers site preparation, grounding, safety, card installation,
and cabling. The Cisco MGX 8850 switch uses either a
PXM45 or a PXM1E controller card and provides support for
both serial bus-based and cell bus-based service modules.
The Cisco MGX 8830 switch uses a PXM1E controller card
and supports cell bus-based service modules. The Cisco
MGX 8950 supports only serial bus-based service modules.
The Cisco MGX 8880 uses a PXM45/C controller card, and
supports only serial bus-based service modules.
This
hardware installation guide replaces all previous hardware
guides for these switches.
Table 4
Descriptions of Technical Manuals and Release Notes for Cisco Multiservice Switch Products (continued)
Document Title
Description
