xviii
Cisco MGX Route Processor Module (RPM-XF) Installation and Configuration Guide
OL-13644-01
About This Guide
Organization
Chapter
Title
Description
Chapter 1
Overview of the MGX RPM-XF
Discusses the features and specifications of the Route
Processor Module (RPM-XF).
Chapter 2
Preparing to Install the MGX RPM-XF
Discusses environmental requirements, safety
recommendations, and describes the various ports and how to
prepare for connections between networks and ports.
Chapter 3
Installing the MGX RPM-XF Front and Back
Cards
Includes basic installation information and describes how to
make connections to LANs, the main PXM
1
, and console.
1.
PXM=prpocessor switch control module
Chapter 4
Installing and Configuring MGX-XF-UI and
MGX-XF-UI/B Management Back Cards
Describes how to install and configure the MGX-XF-UI
management back card.
Chapter 5
Installing and Configuring the
MGX-1OC12POS and the MGX-2OC12POS
Back Cards
Describes how to install and configure the single-port OC-12
POS
2
back card.
2.
POS=Packet Over SONET
Chapter 6
Installing and Configuring the Cisco
MGX-1GE and MGX-2GE Gigabit Ethernet
Back Cards
Describes how to install and configure the single-port GE
3
back card.
3.
GE=Gigabit Ethernet
Chapter 7
Configuring the MGX RPM-XF
Describes the initial configuration of the RPM-XF using
Configuration Mode or AutoInstall. This chapter also explains
how to configure and use 1:N redundancy on the RPM-XF.
Chapter 8
Configuring PNNI Communications
Describes how to configure the RPM-XF to operate as an edge
router in a PNNI network.This chapter also explains how to
configure all port adapter interfaces, followed by procedures
for configuring PVCs
4
and connections with other RPM-XFs.
4.
PVC=Permanent Virtual Circuit
Chapter 9
Configuring MPLS Features
Describes MPLS
5
and VPN
6
features used with the RPM-XF
in the Cisco MGX 8850 switch.
5.
MPLS=Multiprotocol Label Switching
6.
VPN=Virtual Private Network
Chapter 10
Configuring Quality of Service
Describes how to configure QoS
7
on the RPM-XF. Also
describes IPRAN configuration.
7.
QoS=Quality of Service
Appendix A Maintaining the MGX RPM-XF
Provides selected maintenance procedures, including
password recovery, virtual configuration register settings, and
system code upgrades.
Appendix B Cable and Connector Specifications
Provides pinouts for the various ports on the RPM-XF and
associated cables.
Appendix C Cisco IOS and Configuration Basics
Provides information on the Cisco IOS operating system and
configuring the RPM-XF card.
Appendix D Command Summary
Provides provides a high level view of many of the commands
that run on the RPM-XF.
