15
Cisco 40-Gigabit QSFP+ Transceiver Modules Installation Note
OL-24862-01
Attaching the Optical Network Cable
Figure 6
Cabling a 40-Gigabit QSFP+ Transceiver Module Equipped with a Duplex LC
Connector
Step 5
Verify that the optical network cable is fully seated by pulling gently on the cable’s MPO or duplex LC
connector boot. If the network cable disconnects, reinstall it and make sure that the cable connector is
fully seated and that the connector latch engages.
1
LINK
LINK
ACTIVE
ACTIVE
2
334629
QSFP+ transceiver
Network interface
cable
LC connector