12
Cisco 40-Gigabit QSFP+ Transceiver Modules Installation Note
OL-24862-01
Installing the 40-Gigabit QSFP+ Transceiver Module
Figure 3
Installing the 40-Gigabit QSFP+ Transceiver Module (Optical Transceiver Equipped
with a Bail-Clasp Latch Shown)
Step 7
Press firmly on the front of the QSFP+ transceiver with your thumb to fully seat the transceiver in the
module’s transceiver socket. (See
Figure 4
.)
Caution
If the latch is not fully engaged, you might accidently disconnect the QSFP+ transceiver
module.
255432
