Chapter 2 Installing the Cisco RPS
Rack-Mounting the Cisco RPS
2-6
Cisco Redundant Power System Hardware Installation Guide
OL-3654-01
Figure 2-2
Telco Bracket
Attaching Brackets
To install the Cisco RPS in a rack, attach the brackets in one of the following
ways:
•
With the Cisco RPS front panel forward (see
Figure 2-3
).
•
With the Cisco RPS rear panel forward (see
Figure 2-4
).
•
In a center-mount telco rack (see
Figure 2-5
).
Note
Although
Figure 2-3
and
Figure 2-4
show 19-inch brackets, the procedure is the
same for 23-inch, 24-inch, and telco brackets.
10254
