C H A P T E R
2-1
Cisco Redundant Power System Hardware Installation Guide
OL-3654-01
2
Installing the Cisco RPS
You can set the Cisco RPS chassis on a desktop or install it in a rack.
Warning
Only trained and qualified personnel should be allowed to install or replace
this equipment. To see translations of the warnings that appear in this
publication, refer to the
Regulatory Compliance and Safety Information
document that accompanied this device.
Warning
Do not work on the system or connect or disconnect cables during periods of
lightning activity. To see translations of the warnings that appear in this
publication, refer to the
Regulatory Compliance and Safety Information
document that accompanied this device.
Warning
Before opening the chassis, disconnect the telephone-network cables to
avoid contact with telephone-network voltages. To see translations of the
warnings that appear in this publication, refer to the
Regulatory Compliance
and Safety Information
document that accompanied this device.
Warning
This equipment is intended to be grounded. Ensure that the host is connected to
earth ground during normal use. To see translations of the warnings that appear
in this publication, refer to the
Regulatory Compliance and Safety Information
document that accompanied this device.
