aaa Enable, disable, or view or RADIUS user authentication, authorization and
accounting
access-group Bind an access-list to an interface to filter inbound traffic
access-list Add an access list
age This command is deprecated. See ipsec, isakmp, map, ca commands
alias Administer overlapping addresses with dual NAT.
apply Apply outbound lists to source or destination IP addresses
arp Change or view the arp table, and set the arp timeout value
auth-prompt Customize authentication challenge, reject or acceptance prompt
aaa-server Define AAA Server group
ca CEP (Certificate Enrollment Protocol) Create and enroll RSA key pairs into a PKI (Public
Key Infrastructure).
clock Show and set the date and time of PIX
conduit Add conduit access to higher security level network or ICMP
crypto Configure IPsec, IKE, and CA
configure Configure from terminal, floppy, or memory, clear configure
copy Copy image or PDM file from TFTP server into flash.
debug Debug packets or ICMP tracings through the PIX Firewall.
dhcpd Configure DHCP Server
disable Exit from privileged mode
domain-name Change domain name
dynamic-map Specify a dynamic crypto map template
eeprom show or reprogram the 525 onboard i82559 devices
enable Modify enable password
established Allow inbound connections based on established connections
failover Enable/disable PIX failover feature to a standby PIX
filter Enable, disable, or view URL, Java, and ActiveX filtering
fixup Add or delete PIX service and feature defaults
flashfs Show, destroy, or preserve filesystem information
icmp Configure access for ICMP traffic that terminates at an interface
ipsec Configure IPSEC policy
isakmp Configure ISAKMP policy
fragment Configure the IP fragment database
global Specify, delete or view global address pools, or designate a PAT (Port Address
Translated) address
hostname Change host name
http Configure HTTP server
vpdn Configure VPDN (PPTP, L2TP) Policy
vpngroup Configure a policy group for VPN clients
interface Identify network interface type, speed duplex, and if shutdown
ip Set the ip address and mask for an interface
Define a local address pool
Configure Unicast RPF on an interface
Configure the Intrusion Detection System
kill Terminate a telnet session
logging Enable logging facility
map Configure IPsec crypto map
mtu Specify MTU(Maximum Transmission Unit) for an interface
name Associate a name with an IP address
Summary of Contents for PIX 520 - PIX Firewall 520
