manualshive.com logo in svg

Cisco PIX 520 - PIX Firewall 520, Online Help Manual

Share
Download
Cisco PIX 520 - PIX Firewall 520 Online Help Manual Download Page 110

Field Descriptions

The Search>Search by host/network dialog box displays the following fields:

Interface—Lets you select which interface to search for an access rule by host or network.

●   

Network tree—Lets you browse to a host or network and select it as search criteria. You must have
already configured the host or network by which you wish to search in the Hosts/Networks tab.

●   

Search—Initiates the search for the selected host or network.

●   

Help—Provides more information.

●   

Close—Closes the Search>Search by host/network dialog box.

●   

Searching by Host/Network

Follow these steps to search for an access rule by host or network:

Click an Interface in the Interface list.

1.  

In the Network tree, browse to select the host or network you wish to search.

2.  

Click Search.

3.  

Results will be highlighted in yellow on the Access Rules tab.

 

Copyright © 2001 

Cisco Systems, Inc.

 

Summary of Contents for PIX 520 - PIX Firewall 520

































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands