Cisco PA-2FE-FX T Installation And Configuration Manual Download Page 9

Page: 9 / 78

PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration

OL-3474-06

Preface

Related Documentation

http://www.cisco.com/univercd/cc/td/doc/product/core/7206/port_adp/config/index.htm

–

For hardware installation and configuration information (including the Cisco 7206 or
Cisco 7206VXR as a router shelf in a Cisco AS5800 Universal Access Server), refer to the
hardware installation documents for Cisco AS5800 at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/as5800/index.htm

–

For information on network processing engines or network services engines, refer to the

Network Processing Engine and Network Services Engine Installation and Configuration Guide
at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/core/7206/fru/npense/index.htm

•

Cisco 7200 VXR routers:

For hardware installation and configuration information, refer to the

Cisco 7200 VXR Installation

and Configuration Guide

at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/core/7200vx/72vxicg/index.htm

•

Cisco uBR7200 series routers:

For hardware installation and configuration information, refer to the

Cisco uBR7200 Universal

Broadband Routers

index at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/cable/cab_rout/index.htm

•

Cisco 7301 routers:

For hardware installation and configuration information, refer to the

Cisco 7301 Installation and

Configuration Guide

or the

Cisco 7301 Router Quick Start Guide.

at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/core/7301/index.htm

•

Cisco 7304 PCI port adapter carrier card in Cisco 7304 routers:

For hardware installation and configuration information, refer to the

Cisco 7304 PCI Port Adapter

Carrier Card Installation and Configuration Guide

at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/core/cis7300/fru/index.htm

•

Cisco 7401ASR routers:

For hardware installation and configuration information, refer to the

Cisco 7401ASR Installation

and Configuration Guide

or the

Cisco 7401ASR Quick Start Guide at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/core/7401/index.htm

•

For Cisco 7500 series routers hardware installation and configuration information, refer to

Cisco 7500 Installation and Configuration

at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/core/cis7505/cicg7500/index.htm

For Versatile Interface Processor (VIP) hardware installation and configuration information, refer to
the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/core/cis7505/vip1/index.htm

•

For international agency compliance, safety, and statutory information for WAN interfaces:

–

Site Preparation and Safety Guide at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/hardware/safety/

–

Regulatory Compliance and Safety Information for Cisco 7100 Series VPN Routers

at the

following URL:

http://www.cisco.com/univercd/cc/td/doc/product/core/7100/index.htm

Summary of Contents for PA-2FE-FX T















































































Search results

Summary of Contents for PA-2FE-FX T

Reviews:

Related manuals for PA-2FE-FX T

Brands by name

Popular brands

Cisco PA-2FE-FX T, Installation And Configuration Manual

Search results

Summary of Contents for PA-2FE-FX T

Reviews:

Related manuals for PA-2FE-FX T

Brands by name

Popular brands