4-9
PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration
OL-3474-06
Chapter 4 Configuring the PA-2FE
Checking the Configuration
Using show Commands to Verify the New Interface Status
Table 4-4
demonstrates how you can use the
show
commands to verify that new interfaces are configured
and operating correctly and that the
PA-2FE
appears in them correctly. Sample displays of the output of
selected
show
commands appear in the sections that follow. For complete command descriptions and
examples, refer to the publications listed in the
“Related Documentation” section on page viii
.
Note
The outputs that appear in this document may not match the output you receive when running these
commands. The outputs in this document are examples only.
Table 4-4
Using show Commands
Command
Function
Example
show version
or
show hardware
Displays system hardware
configuration, the number of each
interface type installed, Cisco IOS
software version, names and
sources of configuration files, and
boot images
Router#
show version
show controllers
Displays all the current interface
processors and their interfaces
Router#
show controllers
show diag
slot
Displays types of port adapters
installed in your system and
information about a specific
port adapter slot, interface
processor slot, or chassis slot
Router#
show diag 2
show interfaces
type
3
/interface-port-
number
Displays status information about a
specific type of interface (for
example, fastethernet) in a
Cisco 7120 series router
Router#
show interfaces
fastethernet 3/1
show interfaces
type
4
/interface-port-
number
Displays status information about a
specific type of interface (for
example, fastethernet) in a
Cisco 7140 series router
Router#
show interfaces
fastethernet 4/1
show interfaces
type
slot-number/interface-port-number
Note
For the Cisco 7206 router
shelves, the
show interfaces
command requires a shelf
number in the format
show
interfaces
type shelf
number/port adapter slot/port
.
Displays status information about a
specific type of interface (for
example, fastethernet) on a
Cisco 7200 series router,
Cisco uBR7200 series routers,
Cisco 7301 router, or
Cisco 7401ASR router
Router#
show interfaces
fastethernet 1/0
show interfaces
type
interface-processor-
slot
-
number
/
port-adapter-slot-number
/
interface-port-number
Displays status information about a
specific type of interface (for
example, fastethernet) on a VIP in a
Cisco 7500 series router
Router#
show interfaces
fastethernet
3/1/0
