4-3
PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration
OL-3474-06
Chapter 4 Configuring the PA-2FE
Configuring the Interfaces
Step 3
Shut down interfaces by entering the
interface fastethernet
command (followed by the interface address
of the interface), and then enter the
shutdown
command.
Table 4-1
shows the command syntax.
When you have finished, press
Ctrl-Z
—hold down the
Control
key while you press
Z
—or enter
end
or
exit
to exit configuration mode and return to the EXEC command interpreter.
Table 4-1
Examples of the shutdown Command
Platform
Command
Example
Cisco 7120 series routers
interface
, followed by the
type
(
fastethernet
) and
slot/port
(port-adapter-slot-number/
interface-port-number)
The example is for interface 0 and interface 1 on a
PA-2FE in port adapter slot 3.
Router(config)#
interface fastethernet 3/0
Router(config-if)#
shutdown
Router(config-if)#
interface fastethernet 3/1
Router(config-if)#
shutdown
Ctrl-Z
Router#
Cisco 7140 series routers
interface
, followed by the
type
(
fastethernet
) and
slot/port
(port-adapter-slot-number/
interface-port-number)
The example is for interface 0 and interface 1 on a
PA-2FE in port adapter slot 4.
Router(config)#
interface fastethernet 4/0
Router(config-if)#
shutdown
Router(config-if)#
interface fastethernet 4/1
Router(config-if)#
shutdown
Ctrl-Z
Router#
Cisco 7200 series routers
interface
, followed by the
type
(
fastethernet
) and
slot/port
(port-adapter-slot-number/
interface-port-number)
The example is for interface 0 and interface 1 on a
PA-2FE in port adapter slot 6.
Router(config)#
interface fastethernet 6/0
Router(config-if)#
shutdown
Router(config-if)#
interface fastethernet 6/1
Router(config-if)#
shutdown
Ctrl-Z
Router#
Cisco uBR7200 series routers
interface
, followed by the
type
(
fastethernet
) and
slot/port
(port-adapter-slot-number/
interface-port-number)
The example is for interface 0 and interface 1 on a
PA-2FE in port adapter slot 2.
Router(config)#
interface fastethernet 2/0
Router(config-if)#
shutdown
Router(config-if)#
interface fastethernet 2/1
Router(config-if)#
shutdown
Ctrl-Z
Router#
Cisco 7301 routers
interface
, followed by the
type
(
fastethernet
) and
slot/port
(port-adapter-slot-number/
interface-port-number)
The example is for interface 0 and interface 1 on a
PA-2FE in port adapter slot 1.
Router(config)#
interface fastethernet 1/0
Router(config-if)#
shutdown
Router(config-if)#
interface fastethernet 1/1
Router(config-if)#
shutdown
Ctrl-Z
Router#
