3-46
Cisco ONS 15200 Installation, Setup, and Test Manual
78-13765-01
Chapter 3 Installation
Caution
When you insert the DNAM, ensure that the fiber and connector emerging from the adjacent NAMs
are not pinched, which could damage the fibers.
Step 3
Use a slot or Phillips screwdriver to tighten the DNAM retaining screws.
Step 4
Repeat Steps 1–3 for each DNAM you are installing in the MCU.
The ONS 15252 MCU with all modules installed and cover lid shut is shown in
Figure 3-34 An installed ONS 15252 MCU Dummy Network Adaptation module
54847