◦
Two cable management side frames
◦
One cable management top hood frame
◦
One cable management bottom hood frame
◦
Two M4 and four M3 screws.
Step 1
Attach the two cable management frames to the chassis as follows:
a) Position one of the cable management side frame assemblies on the vertical mounting bracket attached to one side
of the front of the chassis.
b) Secure the cable management frame with two M4 screws. (see the following figure).
•
Figure 9: Attaching a Cable Management Assembly to the Chassis
Two M4 screws to secure the cable management
frame to front mounting bracket on chassis.
3
Cable management side frame
1
Four M3 screws to secure top and bottom hood
frames to the chassis.
4
Cable management bottom hood frame
2
c) Repeat Steps 1a through 1b to attach the other cable management frame.
Cisco Nexus 7702 Hardware Installation Guide
25
Installing the Switch Chassis
Installing Cable Management Frames onto the Chassis
