Cisco Nexus 7702, Hardware Installation Manual

Page: 53 / 148

Block Checksum : 0x31e
Serial Number : JAE191106QG
Displaying Environmental Information for a Switch
You can display all of the environment-related switch information by using the
show environment
command.
Enter the show environment command.
Example:
switch# show environment
Power Supply:
Voltage: 50 Volts
Power
Actual Total
Supply Model Output Capacity Status
(Watts ) (Watts )
------- ------------------- ----------- ----------- --------------
1 N7K-AC-3KW 251 W 3000 W Ok
2 N77-AC-3KW 245 W 3000 W Ok
Actual Power
Module Model Draw Allocated Status
(Watts ) (Watts )
------- ------------------- ----------- ----------- --------------
1 N77-F348XP-23 328 W 480 W Powered-Up
2 N77-SUP2E 131 W 265 W Powered-Up
fan1 N77-C7702-FAN 39 W 300 W Powered-Up
N/A - Per module power not available
Power Usage Summary:
--------------------
Power Supply redundancy mode (configured)
PS-Redundant
Power Supply redundancy mode (operational) PS-Redundant
Total Power Capacity (based on configured mode) 3000 W
Total Power of all Inputs (cumulative) 6000 W
Total Power Output (actual draw) 496 W
Total Power Allocated (budget) 1045 W
Total Power Available for additional modules 1955 W
Clock:
----------------------------------------------------------
Clock
Model Hw Status
----------------------------------------------------------
A
Clock Module -- NotSupported/None
B Clock Module -- NotSupported/None
Fan:
------------------------------------------------------
Fan
Model Hw Status
------------------------------------------------------
Fan1(sys_fan1)
N77-C7702-FAN 0.0 Ok
Fan_in_PS1 -- -- Ok
Fan_in_PS2 -- -- Ok
Fan Zone Speed: Zone 1: 0x79
Cisco Nexus 7702 Hardware Installation Guide
43
Managing the Switch
Displaying Environmental Information for a Switch